Insulation in Georgetown, TX
Crawl space encapsulation and vapor barrier work in Georgetown typically runs $2,800-$6,500 for a full encapsulation with dehumidifier, and most jobs finish in one to two days. We’re Envelope Insulation Co., and we treat air sealing as a hard prerequisite before any insulation goes in - not an upsell. In Georgetown, that matters more than most places: the combination of Hill Country limestone crawl spaces, extended cooling seasons, and two distinct housing eras means the same moisture problem rarely has the same cause twice. Call (737) 252-7159 for a written price before any work starts.
Why Georgetown Homes Are Different
Georgetown sits at the eastern edge of the Hill Country on the Balcones Escarpment, where summer attic temperatures routinely exceed 150°F and the cooling season stretches from May through October. That duration punishes under-insulated homes more than peak heat alone.
The housing stock splits sharply. Sun City Texas contains thousands of production homes built from the late 1990s through the early 2010s to energy codes requiring only R-22 to R-30 attic insulation - well below today’s R-38 to R-49 recommendation. Those identical homes are now hitting the window where blown-in insulation has settled and degraded. Meanwhile, post-2015 subdivisions like Wolf Ranch and Morningstar received minimum-code blown fiberglass with no continuous air barriers. The small historic downtown core has pre-1940 wood-frame construction with essentially no original wall insulation.
The February 2021 Winter Storm Uri exposed another Georgetown-specific vulnerability: most homes were engineered almost entirely around heat rejection, with virtually no consideration for cold-weather thermal retention. Contractors working Sun City Texas also know the community’s HOA-linked social networks act as a referral accelerant - one satisfied neighbor can generate four or five jobs on the same street within weeks, because retirees compare utility bills closely and trust peer word-of-mouth over advertising.
Our Main Georgetown Services
Georgetown homeowners call us most often for attic work and spray foam. Here is what those jobs look like locally.
Attic Insulation in Georgetown
Attic insulation in Georgetown means dealing with 150°F peak attic temperatures and a cooling season that runs half the year. In Sun City Texas homes, we regularly find original blown fiberglass settled below the joist tops, and in Wolf Ranch builds we see trusses stuffed with minimum-code batts that leave thermal bypasses at every penetration. We air seal first, then insulate, and we publish before-and-after blower-door numbers so you can verify the result. Attic Insulation in Georgetown covers our full process and pricing.
Spray Foam Insulation in Georgetown
Spray foam insulation in Georgetown makes particular sense for the open-cathedral ceilings and bonus rooms common in Morningstar and other newer subdivisions, where traditional batts leave gaps at irregular framing. We use Icynene and Demilec open-cell products for most residential applications in Georgetown, specified by the job rather than by brand loyalty. Every spray foam job gets a written price before work starts and a documented photo record when we leave. Spray Foam Insulation in Georgetown has full details.
Blown-In Insulation in Georgetown
Blown-in insulation in Georgetown is the most common retrofit for Sun City Texas homes with settled original fiberglass, and for any attic where we need to fill irregular joist bays without removing drywall. We use Owens Corning and GreenFiber products, and we never blow new material over an unsealed attic floor - that is Haven Standard practice, not optional. The blower-door test proves the sealing worked before insulation covers it. Blown-In Insulation in Georgetown explains our full approach.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterCrawl Space Encapsulation & Vapor Barrier in Georgetown
Crawl space encapsulation and vapor barrier work in Georgetown addresses a specific Hill Country problem: limestone bedrock that wicks groundwater into crawl spaces through capillary action, combined with extended cooling seasons that keep ducts in those spaces cold enough to condense moisture for months. In Sun City Texas, we’ve found that the shallow crawl spaces common to ranch-style production homes trap humidity against floor joists; in Wolf Ranch and similar newer builds, perimeter vents installed to code actually worsen the problem by introducing humid outdoor air in May through October. Crawl Space Encapsulation & Vapor Barrier is our full hub page for this service.
Crawl Space Vapor Barrier
Signs you need it
Your crawl space has standing water after rain, white mineral deposits (efflorescence) on the foundation walls, or floor joists that feel damp to the touch in July.
What it costs in Georgetown
A 6-mil to 20-mil vapor barrier installed over bare earth in a Georgetown crawl space typically runs $1,200-$2,800, with thicker mil ratings and larger footprints pushing toward the upper end.
How we do it
We remove debris, grade the earth for drainage, seam-seal the barrier with tape at every overlap, and run it up the foundation walls to a termination strip - all before any insulation touches the joists.
Crawl Space Encapsulation
Signs you need it
Your HVAC ducts sweat in summer, you smell mustiness inside the home, or your hardwood floors cup at the edges during humid months.
What it costs in Georgetown
Full crawl space encapsulation in Georgetown, including wall liners, sealed vents, and a dehumidifier, typically ranges from $4,500-$8,500 depending on square footage and whether we need to address active water intrusion first.
How we do it
We seal all vents, install a reinforced polyethylene liner on walls and floor, tape every seam, install a condensate-pumped dehumidifier, and verify the result with a humidity reading - documented in your photo record.
What Crawl Space Encapsulation & Vapor Barrier Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Vapor barrier (6-20 mil, earth only) | $1,200 - $2,800 |
| Partial encapsulation (walls + floor, no dehumidifier) | $3,200 - $5,500 |
| Full encapsulation with dehumidifier | $4,500 - $8,500 |
Can crawl space work be done in summer?
Yes, and in Georgetown we prefer it - the 90°F outdoor air is cooler than the 150°F attic, and we can verify dehumidifier performance under actual load conditions. Call (737) 252-7159 to schedule; estimates are free.
Will encapsulation help my cooling bills?
It typically reduces cooling load 10-20% in Georgetown homes with ducted HVAC in the crawl space, by stopping duct sweating and conductive losses through the floor. We measure the before-and-after difference on applicable jobs.
Radiant Barrier Installation in Georgetown
Radiant barrier installation in Georgetown targets a specific climate reality: attic temperatures that exceed 150°F for five to six months, radiating heat downward through ductwork and ceiling drywall. In Sun City Texas homes with low-slope rooflines that trap radiant heat, and in newer Wolf Ranch builds where dark shingles compound the problem, a properly installed radiant barrier can reduce attic surface temperatures by 20-30°F. We install radiant barrier as part of a complete envelope strategy, not as a standalone miracle fix - it works after air sealing and with adequate insulation, not instead of them.
Attic Radiant Barrier
Signs you need it
Your attic feels like a furnace by 10 a.m., your ceiling is hot to the touch on summer afternoons, or your upstairs rooms never reach thermostat setpoint despite adequate insulation depth.
What it costs in Georgetown
Radiant barrier installation in a typical Georgetown attic runs $1,800-$3,500 for foil stapled to rafters, or $2,500-$4,800 for a spray-applied radiant coating on the roof deck.
How we do it
We air seal the attic floor first, then staple perforated aluminum foil across rafter bottoms with a minimum 3/4-inch air gap, or spray a low-emissivity coating directly to the roof deck sheathing.
Radiant Barrier & Ventilation
Signs you need it
Your attic has existing radiant barrier but still exceeds 140°F, or your ridge vents and soffit vents were blocked during a re-roof.
What it costs in Georgetown
Radiant barrier plus ventilation correction in Georgetown typically runs $2,800-$5,200, including new soffit baffles, ridge vent extension, or powered attic ventilator if static ventilation is inadequate.
How we do it
We verify intake and exhaust ventilation balance with a flow hood, install baffles to maintain the air gap, then apply the radiant barrier - documented with before-and-after attic temperature readings.
What Radiant Barrier Installation Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Foil radiant barrier (rafter-mounted) | $1,800 - $3,500 |
| Spray-applied radiant coating (roof deck) | $2,500 - $4,800 |
| Radiant barrier with ventilation correction | $2,800 - $5,200 |
Does radiant barrier work with spray foam?
No - spray foam on the roof deck itself acts as the air barrier and insulation layer, making radiant barrier redundant and potentially trapping moisture. We specify one or the other, never both. Call (737) 252-7159 and we’ll walk through which suits your roof.
How long until I see lower bills?
Most Georgetown homeowners see reduced cooling runtime within the first billing cycle, though the exact percentage depends on duct location, insulation depth, and how leaky the envelope was before we started.
Insulation Removal & Replacement in Georgetown
Insulation removal and replacement in Georgetown is most often driven by two local conditions: settled and degraded blown fiberglass in Sun City Texas homes built to 1990s-2000s energy codes, and rodent or moisture contamination in crawl spaces and attics throughout the city. The February 2021 freeze also revealed how many Georgetown homes had insulation compressed by ductwork traffic or displaced by decades of HVAC service - thermal protection that looked adequate from the hatch but had gaps large enough to drive significant heat loss. We remove only what needs removing, document the condition with photos before any material leaves, and air seal before new insulation goes in.
Contaminated Insulation Removal
Signs you need it
Your attic insulation smells musty or of rodent urine, you find droppings or nesting material during a visual check, or your family experiences unexplained respiratory symptoms that worsen at home.
What it costs in Georgetown
Contaminated insulation removal in Georgetown typically runs $2,200-$4,500 for an average attic, including HEPA-contained extraction, bagging, and disposal - replacement insulation is quoted separately after we assess what remains.
How we do it
We set up negative air containment, remove material with HEPA-filtered vacuums into sealed bags, apply an enzyme treatment to affected surfaces, and provide a documented photo record of the cleaned substrate before any new work begins.
Insulation Replacement
Signs you need it
Your settled blown fiberglass no longer covers the joist tops, your batt insulation has fallen away from kneewalls, or your home fails to hold temperature despite the HVAC running continuously.
What it costs in Georgetown
Insulation replacement in Georgetown, including removal of existing material and installation of new blown or batt product to current code, typically ranges from $3,500-$7,200 depending on attic square footage and target R-value.
How we do it
We remove existing material to the deck, air seal all penetrations and top plates, install baffles at every eave, then blow new Owens Corning or GreenFiber insulation to a uniform depth - verified with depth markers and a final blower-door test.
What Insulation Removal & Replacement Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Contaminated insulation removal only | $2,200 - $4,500 |
| Standard removal + replacement (blown) | $3,500 - $7,200 |
| Removal + spray foam replacement (open cell) | $5,500 - $12,000 |
Do I have to leave during removal?
No - our HEPA containment and negative air setup keeps living spaces isolated, though we recommend pets and anyone with respiratory sensitivity stay elsewhere for the day. Call (737) 252-7159 to schedule around your needs.
Can you remove vermiculite?
We do not handle vermiculite insulation - if your pre-1990 Georgetown home has pebbly gray material in the attic, it requires asbestos testing and abatement by a licensed specialist. We can refer you and return for replacement after clearance.
Attic Air Sealing in Georgetown
Attic air sealing in Georgetown is the single most cost-effective envelope upgrade for the city’s two dominant housing types: Sun City Texas homes with thousands of top-plate penetrations for electrical and low-voltage wiring, and newer Wolf Ranch builds where volume builders skipped continuous air barriers to hit price points. The Balcones Escarpment winds and extended cooling season mean every cubic foot of conditioned air that escapes into the attic is replaced by hot, humid outdoor air that your AC must then dehumidify and cool. We never install insulation over an unsealed attic floor - that is Haven Standard practice, not negotiable.
Top Plate & Penetration Sealing
Signs you need it
You feel drafts at outlets and switches on exterior walls, your attic insulation has dark streaks (filtered dust from moving air), or your blower-door test shows excessive leakage at the ceiling plane.
What it costs in Georgetown
Top plate and penetration sealing in a typical Georgetown attic runs $1,800-$3,200, including all electrical, plumbing, and duct penetrations - the blower-door test before and after is included, not extra.
How we do it
We pull back existing insulation, seal every top plate joint with acoustical sealant, foam each wire and pipe penetration, install fire-rated collars where required, and verify with a blower-door test - documented in your record.
Can Light & Duct Boot Sealing
Signs you need it
Your recessed can lights flicker in windy weather, you see insulation dust on furniture below fixtures, or your duct boots feel cold in summer and show condensation stains on the ceiling.
What it costs in Georgetown
Can light sealing with fire-rated covers and duct boot sealing with mastic and mesh tape typically runs $900-$2,400 in Georgetown, depending on fixture count and whether ductwork needs re-support.
How we do it
We install pre-formed fire-rated enclosures over every can light, seal with high-temperature caulk, apply mastic to every duct boot joint, and support sagging flex duct with proper strapping - all before insulation goes back.
What Attic Air Sealing Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Top plate & penetration sealing | $1,800 - $3,200 |
| Can light & duct boot sealing | $900 - $2,400 |
| Full attic air sealing (comprehensive) | $2,800 - $5,500 |
Will air sealing fix my hot upstairs?
It typically reduces the temperature differential between floors by 3-8°F in Georgetown homes, by stopping conditioned air from escaping into the attic and being replaced by hot outdoor air. Call (737) 252-7159 for a blower-door test that quantifies your specific leakage.
Do you seal around chimneys?
Yes - we use fire-rated materials and maintain required clearances per IRC, and we document the assembly with photos. This is standard on every comprehensive attic air sealing job in Georgetown, not an upsell.
Wall Insulation in Georgetown
Wall insulation in Georgetown addresses a gap that air sealing and attic work cannot fix: the thermal bypass through empty stud bays in the historic downtown core’s pre-1940 wood-frame homes, and the minimal-code batt insulation in Sun City Texas and newer production walls that leaves cold spots at every stud. The February 2021 freeze proved how vulnerable uninsulated or poorly insulated walls are in a climate where homes were engineered for heat rejection - when the temperature dropped below 10°F for days, wall cavities with no insulation became thermal bridges that pulled heat out faster than furnaces could replace it. We insulate walls from the interior or exterior depending on siding type and homeowner preference, always with a written scope before work starts.
Drill & Fill Wall Insulation
Signs you need it
Your exterior walls feel cold to the touch in winter, you have no access to wall cavities from the exterior, or your home was built before 1970 and has empty stud bays confirmed by thermal imaging.
What it costs in Georgetown
Drill-and-fill dense-pack cellulose or fiberglass in Georgetown walls typically runs $2,800-$5,500 for a 1,500-square-foot home, including interior patch and paint of the 2-3 inch access holes.
How we do it
We drill 2-3 inch holes at stud-bay spacing, dense-pack cellulose to 3.5 pounds per cubic foot with a remote pressure gauge, verify fill with thermal imaging, then patch and texture-match the drywall.
Injection Foam Wall Insulation
Signs you need it
Your walls have existing batt insulation that has fallen or compressed, you need both insulation and air sealing in one step, or your home has irregular stud bays that dense-pack cannot fill completely.
What it costs in Georgetown
Injection foam wall insulation in Georgetown, including Icynene or Demilec open-cell product, typically ranges from $4,500-$9,200 depending on wall square footage and whether we access from interior or exterior.
How we do it
We remove a row of siding or drill interior access holes, inject foam at low pressure to avoid bowing studs, trim excess after cure, and verify with thermal imaging - the foam both insulates and air seals in one pass.
What Wall Insulation Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Drill & fill (dense-pack cellulose/fiberglass) | $2,800 - $5,500 |
| Injection foam (open cell) | $4,500 - $9,200 |
| Exterior wall insulation with siding removal | $6,500 - $14,000 |
Will injection foam damage my walls?
No - we use low-pressure injection at controlled fill rates, and we monitor for stud bowing with laser levels. In 9,000+ homes since 2016, we have not had a wall distortion claim. Call (737) 252-7159 for specifics on your siding type.
Can you insulate walls without removing drywall?
Yes - drill-and-fill and injection foam both access wall cavities through small holes that we patch and paint. The only exception is lathe-and-plaster in some downtown Georgetown homes, which may require more extensive access.
Attic Cleaning & Rodent Proofing in Georgetown
Attic cleaning and rodent proofing in Georgetown is driven by the same extended warm season that makes the city desirable: rodents are active year-round in attics that never cool below breeding-friendly temperatures, and the oak canopy in established neighborhoods provides continuous aerial access to rooflines. In Sun City Texas, we’ve found that the shallow-pitch truss roofs with minimal overhang clearance create easy squirrel highways; in Wolf Ranch and newer subdivisions, builder-grade soffit vents without hardware cloth are entry points before the first homeowner moves in. We clean what needs cleaning, proof what needs proofing, and document the condition with photos - no work starts without a written price and scope.
Attic Sanitizing & Decontamination
Signs you need it
Your attic smells of ammonia or musk, you find rodent droppings concentrated near the hatch, or your insulation has visible urine staining that shows through from above.
What it costs in Georgetown
Attic sanitizing and decontamination in Georgetown typically runs $1,800-$3,500, including HEPA vacuuming, enzyme treatment of affected surfaces, and disposal of contaminated material - this is cleaning only, not insulation replacement.
How we do it
We set up negative air containment, remove contaminated insulation if present, HEPA-vacuum all surfaces, apply an enzyme digestor to break down organic material, and provide a documented photo record of the sanitized substrate.
Rodent Proofing & Exclusion
Signs you need it
You hear scratching in walls or ceilings at dawn and dusk, you find chewed wires or PVC vent caps, or you’ve had repeated pest control treatments that never stop the activity.
What it costs in Georgetown
Rodent proofing and exclusion in Georgetown, including all entry point identification, hardware cloth installation, and sealant work, typically ranges from $1,200-$2,800 for a single-family home - ongoing monitoring is quoted separately if requested.
How we do it
We inspect the roofline, soffits, fascia, vents, and foundation with a lift and borescope, seal every entry larger than 1/4 inch with rodent-proof materials, and install hardware cloth over vents - then we document every sealed point with photos.
What Attic Cleaning & Rodent Proofing Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Attic sanitizing & decontamination | $1,800 - $3,500 |
| Rodent proofing & exclusion | $1,200 - $2,800 |
| Full attic restoration (cleaning + proofing + insulation) | $4,500 - $9,500 |
Do you trap rodents or just seal?
We do not trap or remove live animals - we seal entry points after you’ve had a wildlife removal specialist clear active inhabitants, or we proof preventively if you’ve never had an infestation. Call (737) 252-7159 and we’ll coordinate timing with your removal service.
How do I know they’re gone before you seal?
We recommend a 5-7 day trapping period with no activity before we seal, and we can install temporary one-way exits at primary entry points if your wildlife specialist recommends them. Sealing active inhabitants inside creates worse problems.
Home Energy Audit in Georgetown
A home energy audit in Georgetown gives you a documented baseline of exactly how much conditioned air your home loses and where, measured with a blower-door test - a pressurization reading that shows, in one number, how leaky your building envelope is. In Sun City Texas homes built to 1990s codes, we regularly see initial readings above 4,000 CFM50; in newer Wolf Ranch builds with taped drywall but unsealed attic penetrations, the number is often lower but the leakage is concentrated at the ceiling plane where it hurts most. The audit produces a written scope with prioritized recommendations and fixed prices for each measure, so you can phase work by budget without losing sight of the whole envelope.
Blower Door Test
Signs you need it
Your utility bills are 30% higher than neighbors with similar homes, you feel drafts despite closed windows, or you’re considering insulation work and want to verify the result.
What it costs in Georgetown
A standalone blower-door test in Georgetown runs $350-$600, or it is included at no charge when bundled with a written scope for insulation or air-sealing work.
How we do it
We install a calibrated fan in an exterior door, depressurize the house to 50 Pascals, measure the airflow required to maintain that pressure, and locate leaks with a smoke pencil and thermal imaging - documented in your report.
Thermal Imaging Inspection
Signs you need it
You have cold spots on exterior walls in winter, your attic hatch is a different color on thermal camera than surrounding ceiling, or you suspect missing insulation behind finished surfaces.
What it costs in Georgetown
Thermal imaging inspection in Georgetown, including full interior and exterior scan with annotated images, typically runs $450-$750 as a standalone service, or bundled with a blower-door test for $650-$950 total.
How we do it
We scan every exterior surface with a FLIR camera under controlled conditions - minimum 20°F temperature differential - mark anomalies on the image, and correlate findings with visual inspection and blower-door data.
What Home Energy Audit Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Blower-door test (standalone) | $350 - $600 |
| Thermal imaging inspection (standalone) | $450 - $750 |
| Full audit (blower door + thermal + written scope) | $650 - $950 |
Will the audit tell me what to fix first?
Yes - the written scope ranks measures by cost-effectiveness and shows the estimated savings for each, so you can decide based on your budget and comfort priorities. Call (737) 252-7159 to schedule; the audit fee applies to any work you proceed with.
How long does the audit take?
Plan on 2.5 to 4 hours for a typical Georgetown home, depending on size and complexity. You receive the written scope and fixed prices within 48 hours, and we review it with you by phone or text - your preference.
Brands We Service in Georgetown
We source materials from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber - no proprietary product lock-in means we specify by job, not by brand quota. Most common products are stocked locally through Austin distributors, so we’re not waiting on freight for standard Georgetown jobs. See our brands for full specifications and warranty terms.
Pricing for Insulation in Georgetown, TX
| Service | Typical range in Georgetown |
|---|---|
| Crawl space vapor barrier | $1,200 - $2,800 |
| Full crawl space encapsulation | $4,500 - $8,500 |
| Radiant barrier (foil, rafter-mounted) | $1,800 - $3,500 |
| Radiant barrier with ventilation correction | $2,800 - $5,200 |
| Contaminated insulation removal | $2,200 - $4,500 |
| Insulation removal + replacement | $3,500 - $7,200 |
| Attic air sealing (comprehensive) | $2,800 - $5,500 |
| Drill & fill wall insulation | $2,800 - $5,500 |
| Injection foam wall insulation | $4,500 - $9,200 |
| Attic sanitizing & decontamination | $1,800 - $3,500 |
| Rodent proofing & exclusion | $1,200 - $2,800 |
| Full home energy audit | $650 - $950 |
Prices in Georgetown push toward the upper end when we encounter active water intrusion, extensive rodent damage requiring structural repair, or pre-1940 construction with irregular framing that slows installation. Every job still begins with a written price before any work starts - Haven Standard Clause 1 - and we offer a free second opinion on any competing written estimate.
Neighborhoods We Serve in Georgetown
Our crews work throughout Georgetown with dispatch coordinated from our Austin office. Most appointments are available within 48 hours, and emergency calls are answered by a live person 24/7.
- Sun City Texas
- Wolf Ranch
- Morningstar
- Serenada
- Historic Downtown Georgetown
Service Area - Cities Near Georgetown
We serve Georgetown directly and regularly work in surrounding communities including Round Rock, TX, Hutto, TX, Leander, TX, and Cedar Park, TX. Scheduling and material coordination run through our Austin office; crews are dispatched to each city without the delay of subcontractor networks.
Serving Georgetown, TX - Our Local Coverage Area
We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation in Georgetown
Georgetown requires permits for spray foam applications and any work involving structural modification; attic insulation retrofit and air sealing typically do not require permitting unless you alter roof ventilation. We handle permit applications for qualifying jobs and include the cost in your written price.
Sun City Texas requires contractor registration and proof of insurance, and some architectural committees review exterior-visible work like radiant barrier on roof decks. We register before arriving and provide your committee with our documentation on request - included in our standard process.
We answer live 24/7, schedule most estimates within 48 hours, and complete standard attic and crawl space jobs within one to two days of approval. Emergency situations - active water intrusion, failed HVAC due to duct collapse - get same-day assessment when safety is involved.
Ready to see what your home is actually losing? Call (737) 252-7159 for a free estimate with a written price before any work starts. We publish before-and-after blower-door numbers on every applicable job, and every visit includes a documented photo record - that’s Haven Standard practice, no exceptions.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Georgetown Customers Say
"Two other companies quoted to blow more insulation on top of what was there. These were the only ones who said the existing material had to come out first, and explained why."
- Clifford E."The winter gas bill dropped by about a third. They had estimated a quarter, so they under-promised."
- Genevieve R."Crawl space encapsulation done properly. Photographs of the vapour barrier at every seam, and the damp smell in the hallway is gone."
- Ainsley P.